How To Remove Shower Walls

A mutual issue with tiled shower wall surrounds is that h2o can seep through the grout betwixt the tiles. In fourth dimension, the drywall behind the environment wall will get saturated and deteriorate which can promote mold growth. The best mode to fix this is to remove the one-time wall and replace it. Hither, our bath experts explain how to remove shower wall surroundings.

Tools yous'll Need to Remove Shower Wall Environment:

Pipe Wrench
Screwdriver
Allen Wrench Set
Material
Utility Knife
Hammers
Crowbar
Chisel
Safety Gloves
Safety Glasses

Remove Shower Fittings:

Remove the shower head, faucets, and h2o handles.
If yous are going to utilise a pipe wrench to twist the faucet, make sure to put fabric around it start to prevent scratching the stainless-steel surface.

Cut Along the Edges of the Shower Surround Wall:

Place the tip of the utility bract on the silicon caulk along the edge of the surround wall.
Sink the blade into the caulk and pull down.
Make certain you lot cut all the way through the caulk and the drywall underneath it.
Cutting through the caulk all the mode around the edge of the wall surround.
This includes cutting the caulk in the dorsum corners and along the lesser and ceiling of the shower surface area.

Remove the Bottom Department of the Shower Environment Wall:

Make sure you are wearing safe glasses. This office will produce a lot of debris from the drywall that can get into your eyes.
As well make sure you lot wear safety gloves. The edges on the ceramic tiles will exist equally sharp as glass and can easily cutting through your skin once the tile is broken.
Kickoff at an edge where the surround wall meets the regular drywall.
Place the chisel so you tin pound it in behind the get-go column of tile.
Remove the entire first column of tiles.
Take the hammer and knock out a row of tile most hallway upwardly through the wall.
Brand sure to knock the head of the hammer through the tiles and drywall backside information technology.
Place the claw side of the hammer or the curved end of a crowbar into the opening you've created with the hammer.
Make sure the claw role of the hammer is inserted through the holes and backside the drywall.
Gently force the lower section of drywall off of the screws or nails holding information technology to the studs by lifting the backend of the hammer handle up so the claw end pushes out against the behind of the surroundings wall.
Remove the bottom department once it is loose.

Remove the Meridian Section:

Reach up and gently pull the upper section away from the wall until it'due south from the screws and studs.
Take the department down and carefully prepare it aside.

Remove the Back Wall:

You lot are going to echo the aforementioned procedure equally the side wall.
Dial out of a row of tiles halfway upwardly the wall.
Gently tug on the wall until it pulls through the heads of the screws.
Pull it out of the tub area and prepare it bated.

Repeat the aforementioned procedure on the third side of the wall to remove the entire shower wall environs.

And that completes our step by footstep instructions for how to remove a shower wall environment! The side by side pace of your project would be to install a new wall and relish your newly renovated shower. If you lot need help with this project or the next steps feel free to accomplish out to PJ Fitz today!